FW-P200 FREEWAVE" WIRELESS PET-IMMUNE PIR

 

The FW-P200 is an advanced, fully supervised low-current wireless PIR that includes a FreeWave transmitter. Both transmitter and detector circuits are powered by an on-board, long life Lithium battery. Each FW-P200 has a unique ID code (This code is impossible to reproduce). Following detection, FW-P200 triggers the onboard transmitter that transmits its specific FreeWave ID followed by an alarm signal and status designators for battery condition. If detector cover is removed Tamper Event triggers the onboard transmitter. Alarm and other data are forwarded to the alarm control panel. A periodic test transmission for supervision purposes takes place automatically once in 12~14 min. The receiver is informed that the particular detector is taking an active part in the wireless security system. The FW-P200 has unique Alarm Power Saver (APS) mechanism. Whenever the FW-P200 cover is removed or the unit s cover is put back, a message will be transmitted with Tamper                                        
FEATURES
- State-of-the-art wireless security system
- Low current ASIC PIR Technology
- Battery life : up to 4 years
- Built in an Automatic Power Saver (APS)
- Frequency Band: 433MHz
- Low Battery condition signal transmission
- Range up to 1 km at free space.
- Height installation calibration free (1.5m - 3.6m).

This device complies with: European Council Directive
EMC 89/336/EEC
EN50130-4
EN301489
EN300220
EN50081.
SAFETY 73/23/EEC
EN60950 (ITE)

TECHNICAL SPECIFICATIONS
- Data Protocol FreeWave Modulation Type FSK (1 Frequency)
- Frequency 433MHz
- Identification Unique ID serial number 24 bit
- Event Transmission Alarm, Tamper, Test, Supervision, Low Bat
- Supervision Timing 12~14 minutes (randomly)
- Optic Detection Method Dual Element PIR (ASIC Based) Optic Detection Speed 0.3 ~ 1.5 m/sec
- Lens Type Spherical Hard Lens Detection
- Coverage 105 degree 18m x 18m
- Environment Condition Jumper for Normal or Harsh selection
- Battery Lithium. 3V Type: xx123 Size: 2/3AA Current Consumption Standby ~10 mA Transmission ~16 Ma Power Saving APS (Automatic Power Saver)
- Installer Test Modes LED Idicator (RF & Optic) Walk test & Alarm transmission test
- Operating temperature Range -10ฐC to +50ฐC
- Dimensions 137mm x 70mm x 53mm
- Weight (inc. battery) 120 gr
- Standards FCC Part 15 and ETS 300-220


Freewave P200 specification and installation manual

CROW Engineering 2007 Catalogue (2.2MB PDF)

ราคาในออสเตรเลีย

Download bronchure, manual, software ของ Crow จาก ผู้ขายในออสเตรเลีย
FALSE ALARM PREVENTION

The Power of One (1.8MB PDF)

GE-NetworX Keypad (1.1MB PDF)

GE-Networx Brochure (435KB PDF)

GE-NX Series Feature Comparision (86KB PDF)

CROW Engineering 2007 Catalogue (2.2MB PDF)

Hit Counter   Copyright 2002 Thaismarthome.com