FEATURES
· State-of-the-art wireless security system
· Low current Technology
· Powered by a 3.6Volt Lithium battery
· Battery life : up to 4 years
· Frequency Band: 433MHz
· Contact Open transmission
· Contact Close transmission
· Tamper Changed transmission
· Supervision transmission
· Battery condition signal transmission
· Range up to 1 km at free space.
· Unique ID number

OPERATION The Wireless Magnetic detector transmits the following events data: ALARM Alarm transmission triggered by magnet removal (door/window open/close). LOW BAT Whenever the battery reaches a preset low level (~2.4V) Battery Low signal will be sent with the nearest message (Supervisor, Alarm, etc.). TAMPER Whenever the FW-MAG cover is removed or the unit s cover is put back, a message will be transmitted with Tamper signal. SUPERVISOR - a periodical transmission. Every 12~14 min. indicates detector s presence.

This device complies with: European Council Directive EMC 89/336/EEC EN50130-4 EN301489 EN300220 EN50081. SAFETY 73/23/EEC EN60950 (ITE)

TECHNICAL SPECIFICATIONS
- Data Protocol FreeWave Modulation Type FSK (1 Frequency)
- Identification Unique ID serial number 24 bit
- Detection Method Internal Reed Switch or External Magnet Device
- Battery Lithium. 3.6V Type: XL-050F Size: 1/2AA
-Current Consumption Standby ~5 mA Transmission ~16 mA
- Tamper Switch Transmission on Front Cover Removal: Back Cover Tamper (Option)
- Operating temperature Range -10°C to +50°C
- Dimensions 87mm x 35mm x 24mm
- Weight (inc. battery) 40 gr